SPS-5 Software

WaveWare Technologies, Inc .

"We Deliver Information at the Speed of Light"

Send Mail to: webmaster@wirelessmessaging.com with Questions or Comments about this Website.

Phone: 1.800.373.1466 or 972.479.1702 Fax: 972.479.1735

WaveWare Technologies, Inc.

Our Office Hours:

Today's Date:

8am-5pm M-F Texas Time

Welcome Page

All Our Products

Product Brochures

One Near You

Product Manuals

Technical Support

Software & More

Complete Systems

On-Line Forms

SPS-5 Series Paging System Encoder Programming Software Download Page

WaveWare Paging Encoder Setup Software allows you to Configure and Test your WaveWare Paging System.
You can also Perform Range Testing and Demonstrate the Advanced Features of the WaveWare Paging System.

The are 4 Versions of our Encoder Software, the v6, v7, v8 and the v9.
Most Systems have the version marked on the Front Lid of the SPS-5 Enclosure.
If your Paging System is marked as SPS-5 v9 , you will Require the v9 Software.
If your Paging System is marked as SPS-5 v8 , you will Require the v8 Software.
If your Paging System is marked as SPS-5 v7 , you will Require the v7 Software.

If your Paging System is marked as Only SPS-5 without any version number, the v6 Software should work.
The v6 Encoder Software should work on Models labeled v6, v6.35 and also the older versions v4 and v5.
The version number should be labeled on a Chip which is located on the Encoder Board.

Please Note: The v4, v5, v6 are No Longer Supported or Repairable, but for those who still have working systems, the v6 Encoder Software should work just fine for adding/editing the Pager Database and possibly for the Encoder Settings, depending on the version.
The SPS-5 v7 is also No Longer Supported, but some repairs are still possible at this time.
The v7 Encoder Software MUST be used with ALL 8 Dip Switches on the Encoder Board set to " ON " before the Systems's Database is Read or you may corrupt the Database and Settings.

SPS-5 Encoder Software

Imortant Information

WWEncoderSetupv8.exe (5.0MB)

WWEncoderSetupv7.exe (3.0MB)

WWEncoderSetupv9.exe (5.5MB)

WWEncoderSetupv6.exe (2.5MB)

SPS-5 Series Encoder Setup - FREE - Software Downloads

NEW - Dual Com Port System v9

Single Com Port System v8

Single Com Port System with One Alarm Contact

(No Alarm Contact)

(Alarm Contact Thru RJ-45, See User Manual) v7

(Alarm Contact Thru DB-9 Serial Port) v6.35

Please CLICK on the Underlined Text or the Computer Icon to Download the Software.

This is an EXE File.